Suitable for selected vehicles originally equipped with a 4x100 stud pattern, 56.1mm centre bore and M12x1.5 wheel studs.

Popular applications include selected Honda Civic EG/EK, Honda Integra, Honda CR-X, Honda Jazz, Mitsubishi Lancer CE, MG3, Proton Satria, Wira and Putra models.

Vehicle model and production year alone do not guarantee fitment. Please verify the original PCD, centre bore, stud thread and wheel clearance before ordering.

• Quantity: 4 Pieces
• Spacer Thickness: 20mm Each
• Vehicle-Side PCD: 4x100
• Wheel-Side PCD: 4x100
• Centre Bore: 56.1mm
• Stud Thread: M12x1.5
• Mounting Type: Bolt-On Stud Type
• Design: Hubcentric
• Finish: Black

• 4 × 20mm Hubcentric Wheel Spacers
• 16 × M12x1.5 Open-Ended Mounting Nuts

Only the items shown and listed are included.

Please verify all of the following:

• The original vehicle PCD is exactly 4x100.
• The vehicle hub centre bore is exactly 56.1mm.
• The original wheel stud thread is M12x1.5.
• The wheel uses a compatible 4x100 stud pattern.
• The rear wheel mounting pad has suitable stud recesses.
• The original studs will not contact the back of the wheel.
• The wheel will sit completely flush against the spacer.
• There is sufficient tyre-to-guard and suspension clearance.

1. Park the vehicle securely on a flat surface.
2. Remove the wheel and clean the original hub mounting surface.
3. Position the spacer against the hub.
4. Confirm that the spacer sits completely flat against the hub.
5. Install the supplied M12x1.5 open-ended nuts.
6. Tighten the nuts gradually using a diagonal or star pattern.
7. Check whether the original studs extend beyond the spacer face.
8. Confirm that the wheel recesses clear the original studs.
9. Install the wheel onto the spacer studs.
10. Tighten all wheel nuts to the specified torque.
11. Re-torque all fasteners after approximately 50–100km.

Will these fit every vehicle listed in the table?
No. The table contains popular applications only. Different variants may use different PCDs, centre bores, studs or wheel designs.

Will these fit Honda Civic Type R models?
Generally no. Many Type R models use different wheel and hub specifications.

Will these fit Mitsubishi Lancer Evolution models?
No. Lancer Evolution models generally use a different stud pattern.

Why do I need recesses behind my wheels?
The original vehicle studs may extend beyond the 20mm spacer. The recesses provide clearance so the wheel can sit flush against the spacer.

What if my wheels have a flat back with no recesses?
The spacers may not be suitable if the original studs extend beyond the spacer face. Do not install the wheel unless it sits completely flush.

Are these PCD adapters?
No. They are 4x100 to 4x100 wheel spacers and do not convert one stud pattern to another.

Can I use these with aftermarket wheels?
Only when the wheels use a compatible 4x100 PCD and have sufficient centre-bore and rear stud clearance.

Can I stack two spacers together?
No. Wheel spacers must never be stacked.

Do the spacers need to be re-torqued?
Yes. All fasteners should be checked and re-torqued after approximately 50–100km and inspected regularly afterwards.

This product is covered against manufacturing defects under our applicable warranty policy.

The warranty does not cover incorrect fitment, improper installation, incorrect torque, impact damage, motorsport use, vehicle modification, stacked spacers or normal wear and tear.

Fast Dispatch: Orders are generally processed and dispatched within 24–48 business hours.

Returns: Please check all specifications before installation. Products that have been installed, marked, modified or damaged may not be eligible for change-of-mind return.

Please contact our customer service team before returning an item to confirm eligibility and receive return instructions.