Low-profile coverage
Clean OEM-style finish
A sleek tri-fold hard lid profile gives your ute a refined, practical finish while helping protect cargo from the weather.
Skip to product information
Heavy-Duty Aluminium Tri-Fold Hard Tonneau Cover for Mazda BT-50 2020-2026
$659.00
$739.00
Sale ends in
--:--:--
—
Pickup available at Yara Auto Parts
Usually ready in 24 hours
Large-item delivery
Estimate shipping
Enter your postcode for an estimated Tri-Fold Hard Lid delivery rate, including applicable remote-area surcharges.
Recommended
Free store pickup — save on shipping
Large items are expensive to freight, so we highly recommend free collection from our Banksmeadow store.
Yara Auto Parts
U6/11 Julian Cl, Banksmeadow NSW 2019
Select Pick up at checkout. We will notify you when your order is ready.
View standard state rates
| State | Standard rate | Remote-area policy |
|---|---|---|
| NSW | $80 | No surcharge |
| ACT | $90 | No surcharge |
| VIC | $110 | No surcharge |
| QLD | $125 | +$100 |
| SA | $120 | +$100 |
| WA | $125 | +$100 |
| TAS | $200 | +$100 |
| NT | $350 | +$100 |
Estimates are for guidance only. Remote depots, islands, PO boxes and unusually difficult delivery addresses may cost more. We will confirm any adjustment before dispatch.
Product Details Tap to expand
ALUMINIUM TRI-FOLD HARD TONNEAU COVER
Mazda BT-50 | 2020 – 2026 | Fully Assembled
Mazda BT-50 2020+
Tri-Fold Hard Cover
Heavy-Duty Aluminium
Weather Resistant
OE Matte Black
Practical Installation
⚖️ LEGAL & TRADEMARK DISCLAIMER: AFTERMARKET PRODUCT
Please note: This is a premium Aftermarket Product and is NOT a genuine OEM part. Any vehicle names, logos, or badges (e.g., Mazda, BT-50) depicted in the product images are the sole property of their respective trademark owners. They are shown strictly for illustrative and fitment demonstration purposes only to help customers understand compatibility. Yara Auto Parts is an independent supplier and is not affiliated with, endorsed by, or authorized by Mazda Motor Corporation.
✅ ZERO ASSEMBLY REQUIRED – READY TO INSTALL
Forget complicated manuals and missing hardware. This cover arrives completely assembled in the box with all necessary mounting hardware included. Simply align it on your BT-50's tub, clamp it down, and you can take it on or off once correctly aligned and secured!
Product Overview
Vehicle
Mazda
Series
BT-50
Year Range
2020 – 2026
Type
Tri-Fold Hard Cover
Material
Aluminium Alloy
Finish
OE Matte Black
Key Features
01
Heavy-Duty Hard Panel
Constructed from premium aluminium panels that provide ultimate security and durability, protecting your cargo from theft and harsh Australian weather.
02
Smart Tri-Fold Design
Designed for everyday convenience, allowing quick access to your truck bed while keeping your tools and belongings secure and out of sight.
03
Drive Open or Closed
Designed for ultimate versatility. Securely fold the cover and strap it down at the bulkhead to safely drive with the cover in the open position for oversized loads.
04
Weather-Resistant Seal
Engineered with a superior perimeter rubber seal system that blocks out rain, dust, and dirt, ensuring your equipment stays dry and protected.
05
OE Matte Black Finish
Features a premium OE matte black textured pattern that matches your BT-50's factory trims and resists scratches and UV fading.
06
Perfect Fitting Alignment
Custom-designed specifically for the Mazda BT-50 tub to ensure a snug, perfect fit with zero rattling while driving.
What's in the Box
Included
Fully Assembled Tri-Fold Cover
Included
Mounting Hardware & Weather Seals
Compatibility
| Make | Model | Supported Trims | Years |
|---|---|---|---|
| Mazda | BT-50 | All Dual Cab Trims | 2020 – 2026 |
⚠ Note: Designed for standard tubs. May require removal of factory sports bars or headboards for proper installation unless otherwise specified.
Important Fitment Note — Special Mounting Brackets May Be Required
Test-fit the cover before drilling. If the supplied clamps cannot engage securely with your tub rails, the supplied special mounting brackets may need to be installed on both sides of the tub, as shown below. Bracket quantity and position may vary by vehicle.
Installation Steps
- Position the cover: Lay the tri-fold cover flat and square on top of the tub. Align the front, rear and both side edges.
- Locate and mark: From inside the tub, identify where each clamp needs to engage. Hold the supplied special brackets against the corresponding positions on both tub rails and mark the drilling points carefully.
- Remove the cover: Lift the tri-fold cover off the tub before drilling.
- Install the brackets: Before drilling, confirm there are no wiring looms, fuel lines, brake lines or other components behind the marked areas. Drill the marked holes, apply suitable corrosion protection to exposed metal, then bolt the brackets securely to both tub rails.
- Apply the foam sealing tape: Clean and dry the mounting surfaces. Apply the supplied foam tape around all four tub edges, including the tailgate edge. Position the tape so it straddles the tub-rail edge—approximately half on the top horizontal surface and half down the inside vertical surface.
- Refit the cover: Place the tri-fold cover back onto the tub and check the alignment again.
- Secure the clamps: Hook each clamp onto its installed bracket and tighten evenly until the cover is held firmly. Do not overtighten.
- Final safety check: Confirm every bracket, bolt and clamp is secure. Re-check all fasteners after the first short drive and periodically thereafter.
Professional installation is recommended if you are unsure about drilling, bracket placement or clamp tension.
Tri-Fold Hard Lid Features
Built for fast access, secure coverage and everyday ute use
Premium tri-fold coverage with low-profile styling, durable aluminium construction and practical loading flexibility.
Quick access
Open only what you need
Fold back the front panels for quick tub access without removing the whole cover. Ideal for everyday tools, shopping, luggage and work gear.
Flexible loading
Full cargo access when required
The tri-fold design opens wide when you need more tub space, giving you flexibility for taller or bulkier loads.
Aluminium build
Strong panels for daily use
Durable aluminium construction and a tough black finish help the cover stand up to Australian weather and regular work use.
Simple fitment
Designed for straightforward installation
Vehicle-specific fitment and clamp-style mounting make setup cleaner, faster and easier to check before daily use.
Warranty
Drive with confidence. All Yara Auto Parts products, including roller shutters, come with a 12-month voluntary manufacturer warranty against manufacturing defects, in addition to your rights under the Australian Consumer Law.
Independent aftermarket notice: Vehicle manufacturer names, vehicle images, badges and logos are used only to identify compatibility or illustrate fitment. Yara Auto Parts is an independent aftermarket business and is not affiliated with, sponsored by or endorsed by any vehicle manufacturer. All third-party trade marks and logos belong to their respective owners. Products are aftermarket unless expressly stated otherwise. Read our IP & Vehicle Compatibility Disclaimer.
If you need to make a claim or require assistance, our Sydney-based team is ready to help.
View Warranty Policy
Return
Shop with peace of mind. If you change your mind or the item isn't right for you, we offer an easy 30-day return policy for unused products in their original packaging. Our Sydney team makes the process hassle-free.
View Return Policy.
Shipping
Fast, reliable dispatch. Orders are processed from our local Sydney warehouse within 1 business day. We offer competitive flat-rate freight across Australia.
View Shipping Policy
You May Also Like
Explore our latest products.
