Designed for:

• Subaru WRX VB
• Model Years: 2022–2026
• Body Style: 4-Door Sedan
• Package: 4-Piece Window Visor Set

This product is not a universal-fit weather shield and may not suit earlier WRX generations or vehicles with different window-frame designs.

• Product Type: Window Visors / Weather Shields
• Quantity: 4 Pieces
• Material: High-Clarity Acrylic
• Approximate Thickness: 3.0mm
• Manufacturing Method: Precision Injection-Moulded
• Finish: Dark Tint
• Installation Type: Exterior Adhesive Fit
• Drilling Required: No
• Position: Front and Rear Side Windows

• 2 × Front Window Weather Shields
• 2 × Rear Window Weather Shields
• Pre-Applied or Supplied Automotive-Grade Adhesive Tape

Please check all four pieces and test-fit them before removing the adhesive backing.

These weather shields install directly onto the exterior window frames using automotive-grade adhesive tape. No drilling is required.

Basic installation guide:

1. Wash and dry the exterior window-frame mounting areas.
2. Remove wax, polish, oil and cleaning residue using an alcohol preparation wipe.
3. Allow the surface to dry completely.
4. Test-fit each weather shield and confirm its position.
5. Peel back a small section of the adhesive liner from both ends.
6. Position the weather shield carefully against the window frame.
7. Slowly remove the remaining liner while maintaining alignment.
8. Press firmly along the complete adhesive area for approximately 20–30 seconds.

Are these injection-moulded?
Yes. The weather shields are precision injection-moulded for consistent shape and accurate vehicle-specific fitment.

Is this a four-piece set?
Yes. The package includes two front and two rear window weather shields.

Is drilling required?
No. The weather shields install using automotive-grade adhesive tape.

Do they install inside or outside the window channel?
These are exterior-mounted weather shields that attach to the outside of the window frame.

Can I open the windows while it is raining?
The weather shields allow the windows to be opened slightly while helping reduce direct rain entry. They cannot prevent all water entry during heavy rain or strong winds.

Will they completely eliminate wind noise?
No. They help redirect airflow and may reduce turbulence, but wind and road noise can vary depending on speed, window position and driving conditions.

Can I wash the vehicle immediately after installation?
No. Allow the adhesive at least 24 hours to bond before washing the vehicle.

Can they be removed later?
Yes, but careful removal is required. Professional removal is recommended to reduce the risk of leaving adhesive residue or damaging the vehicle finish.

• Clean using mild automotive soap and water.
• Do not use abrasive polish, harsh chemicals or solvents.
• Do not pull or lift the visor edges during cleaning.
• Check the adhesive edges periodically.
• Avoid directing high-pressure water closely at the adhesive mounting areas.

This product is covered against manufacturing defects under our applicable warranty policy.

The warranty does not cover incorrect installation, insufficient surface preparation, accidental damage, modification, impact damage, improper cleaning or normal wear and tear.

Fast Dispatch: Orders are generally processed and dispatched within 24–48 business hours.

Inspect Before Installation: Please inspect all four pieces and test-fit them before removing the adhesive backing.

Returns: Products that have been installed, used, marked or have had the adhesive backing removed may not be eligible for change-of-mind return.

Please contact our customer service team before returning an item to confirm eligibility and receive return instructions.