Name: 35mm Hubcentric Wheel Spacers 5x114.3 70.5 1/2x20 2PCS For Ford Falcon
Brand: Yara Auto Parts
SKU: 5-114.3 35mm 2pcs
Price: 89.00 AUD
Availability: InStock

35mm Hubcentric Wheel Spacers 5x114.3 70.5 1/2x20 2PCS For Ford Falcon

$89.00

Sale ends in --:--:--

—

Pickup available at Yara Auto Parts

Usually ready in 24 hours

35mm Hubcentric Wheel Spacers 5x114.3 70.5 1/2x20 2PCS For Ford Falcon

✨ Quick Specs

✔️ Quantity: 2 Wheel Spacers
✔️ Thickness: 35mm Per Spacer
✔️ PCD: 5x114.3 to 5x114.3
✔️ Centre Bore: 70.5mm
✔️ Stud Thread: 1/2x20 UNF
✔️ Type: Hubcentric Bolt-On Stud Type
✔️ Finish: Black
✔️ Included: 10 × 1/2x20 Mounting Nuts
✔️ Fitment: Front or Rear Only If All Specs Match

Important: This is a 2PCS pair set, suitable for one axle only. It may be installed on the front or rear only if your vehicle, wheels and clearance all match the required specifications: 5x114.3 PCD, 70.5mm centre bore and 1/2x20 UNF wheel studs.

Safety & Fitment Declaration

Wheel spacers are safety-critical components. Incorrect fitment or installation may cause vibration, wheel loosening, bearing stress, tyre contact, handling issues or serious vehicle damage.

Professional installation is strongly recommended.
Do not install if the PCD, centre bore, stud thread or wheel clearance does not match exactly.
The spacer must sit completely flat against the vehicle hub.
The wheel must sit completely flat against the spacer before tightening.
Do not stack wheel spacers.
Check brake caliper, suspension, guard and tyre clearance before driving.
Use the correct torque specification for your vehicle and wheels.
Re-torque all nuts after 50–100km of driving and inspect regularly.
Check your local road regulations before use, as wheel spacer legality may vary by state or territory.
The buyer and installer are responsible for confirming safe and legal fitment before use.

Give your vehicle a wider and more aggressive stance with this pair of 35mm Hubcentric Bolt-On Wheel Spacers.

Each spacer moves the wheel outward by approximately 35mm, helping improve wheel positioning when correctly matched to your vehicle, wheel offset and tyre setup.

The 70.5mm hubcentric design helps locate the spacer on compatible hubs, while the bolt-on stud setup allows the spacer to be secured to the original vehicle studs using the supplied 1/2x20 mounting nuts.

Why Choose These Wheel Spacers?

🎯 Hubcentric 70.5mm Design: Designed to locate on compatible 70.5mm hubs for improved centering compared with non-hubcentric spacers.
🔩 Bolt-On Stud Type: Spacers bolt to the vehicle’s original studs, with the wheels then mounted onto the spacer studs.
📏 35mm Per Side: Moves each wheel outward by approximately 35mm for a wider stance.
📦 2PCS Pair Set: Includes 2 spacers and 10 matching 1/2x20 mounting nuts.

🚘 Vehicle Compatibility

Suitable for selected vehicles originally equipped with 5x114.3 PCD, 70.5mm centre bore and 1/2x20 UNF wheel studs.

The table below is a compatibility guide only. Vehicle model and year alone do not guarantee fitment.

Brand	Model	Series / Years	Fitment Status	Important Notes
Ford	Falcon	AU 1998–2002	High Compatibility	Confirm 5x114.3, 70.5CB, 1/2x20 thread and wheel clearance before installation.
Ford	Falcon	BA / BF 2002–2008	High Compatibility	Common Australian application. Confirm hub bore and wheel mounting face before fitting.
Ford	Falcon	FG / FG X 2008–2016	High Compatibility	Check wheel offset, tyre-to-guard clearance and brake clearance after adding 35mm per side.
Ford	Falcon	EA / EB / ED / EF / EL 1988–1998	Conditional	Some earlier models may have hub differences. Measure hub bore and thread before ordering.
Ford	Fairlane / Fairmont / LTD	Selected Falcon-platform models, approx. 1988–2007	Conditional	Only suitable where PCD, centre bore and stud thread match exactly.
Ford	Territory	SX / SY / SZ 2004–2016	Conditional / Popular Application	Confirm hub bore and wheel clearance. Some references list 70.5–70.6mm; measure before fitting.
Ford	Mustang	1994–2014 Import Models	Conditional	Only where vehicle uses 5x114.3, 70.5CB and 1/2x20 studs. Not suitable for 2015+ Mustang.

Important: Always confirm the actual vehicle PCD, hub bore, stud thread, wheel centre bore, wheel mounting pad and clearance before ordering or installation.

📋 Detailed Specifications

Quantity: 2 Pieces
Spacer Thickness: 35mm Each
Vehicle-Side PCD: 5x114.3
Wheel-Side PCD: 5x114.3
Centre Bore: 70.5mm
Stud Thread: 1/2x20 UNF
Mounting Type: Bolt-On Stud Type
Design: Hubcentric
Finish: Black

These are straight spacers, not PCD adapters. The vehicle and wheel must both use a 5x114.3 stud pattern.

📦 What’s in the Box?

2 × 35mm Hubcentric Wheel Spacers
10 × 1/2x20 Mounting Nuts

Only the items shown and listed are included.

🔍 Checks Required Before Ordering

Please verify all of the following before purchase:

The original vehicle PCD is exactly 5x114.3.
The vehicle hub centre bore is exactly 70.5mm.
The original wheel stud thread is 1/2x20 UNF.
The wheel uses a compatible 5x114.3 stud pattern.
The wheel centre bore and rear mounting pad are suitable.
There is enough guard, brake, suspension and tyre clearance after adding 35mm per side.
The spacer sits completely flush against the hub.
The wheel sits completely flush against the spacer.

Do not install the product if any measurement, surface contact or clearance does not match correctly.

🔧 Fitting & Installation

Park the vehicle securely on a flat surface.
Remove the wheel and clean the original hub mounting surface.
Position the spacer against the hub.
Confirm that the spacer sits completely flat against the hub.
Install the supplied 1/2x20 mounting nuts.
Tighten gradually using a diagonal or star pattern.
Install the wheel onto the spacer studs.
Tighten all wheel nuts to the specified torque.
Recheck and re-torque all fasteners after approximately 50–100km.

Professional installation is strongly recommended.

Never stack wheel spacers. Do not drive if the spacer or wheel does not sit completely flush. Check all fasteners regularly as part of normal vehicle maintenance.

❓ Frequently Asked Questions

Is this listing for 2 spacers or 4 spacers?
It includes 2 spacers and 10 mounting nuts.

Can I install them on the front?
Yes, they may be installed on the front only if the vehicle hub, brake clearance, wheel clearance, tyre clearance and local legal requirements are confirmed.

Can I install them on the rear?
Yes, they may be installed on the rear only if all specifications and clearances match.

Will these fit every Ford Falcon?
No. Your vehicle must match 5x114.3 PCD, 70.5mm centre bore and 1/2x20 UNF wheel studs.

Will these fit Ford Territory?
They may suit selected Territory models where all specifications match. Please measure before ordering.

Will these fit Mustang 2015+?
No. 2015+ Mustang models generally use M14x1.5 studs, so this 1/2x20 spacer is not suitable.

Are these PCD adapters?
No. These are 5x114.3 to 5x114.3 wheel spacers and do not convert the stud pattern.

Can I stack two spacers together?
No. Wheel spacers must never be stacked.

Do the spacers need to be re-torqued?
Yes. All fasteners should be checked and re-torqued after approximately 50–100km and inspected regularly afterwards.

🛡️ Warranty Information

This product is covered against manufacturing defects under our applicable warranty policy. 12 months warranty.

The warranty does not cover incorrect fitment, improper installation, incorrect torque, impact damage, motorsport use, vehicle modification, stacked spacers, wheel clearance issues, legal compliance issues or normal wear and tear.

🚚 Shipping & Returns

Fast Dispatch: Orders are generally processed and dispatched within 24–48 business hours.

Inspect Before Installation: Please check all measurements and inspect the product before installation.

Returns: Please check all specifications before installation. Products that have been installed, marked, modified or damaged may not be eligible for change-of-mind return.

Please contact our customer service team before returning an item to confirm eligibility and receive return instructions.